stock no. :
19863
Machine's group :
Cylindrical grinder
Type :
STUDER S 20-2
Controller :
SPS SIEMENS SIMATIC HMI TOUCH
Technical data
Centre height
100 mm
Distance between centres
400 mm
Grinding wheel:
Diameter
300 mm
Width
30 mm
Bore
127 mm
Workpiece weight on centres max.
20 kg
Grinding wheel speeds:
number (steps)
3
up to
2450 rpm
Hydraulic cross travel
170 mm
Angular displacement
30 °
Work piece spindle head:
speeds:
stepless
from
60 rpm
up to
1200 rpm
Spindle hole
20 mm
Spindle taper:
4 MT
Taper in tailstock:
2 MT
Spindle stroke
20 mm
Spindle diameter
32 mm
Table angular displacement
30 °
Feeds:
Z axis (longitudinal travel)
100 - 3500 mm/min
X axis (transversal)
0.01-9 mm/min
External Grinding wheel motor
4.5 HP
External Grinding wheel motor
3 kW
Internal Grinding wheel motor
1.1 kW
Machine's weight about
1600 kg
Overall dimensions machine:
Length
1500 mm
Width
1400 mm
Height
1400 mm
Various accessories:
Touch screen
Electronic handwheels
Tailstock with fine adjustement
Internal grinding attachment
Spindle speeds
35000 rpm
Coolant system
Paper filter facility
Safety device
Sliding door
Advantages of the NC machine compared to a standard machine:
- Longitudinal: soft left/right stops, teach-in adjustment, simple and precise corrections.
- Dressing: for external grinding, automatic dressing with compensation. Dressing during the cycle or according to the number of parts.
- Transversal: diameter, teach-in adjustment, simple and precise corrections.
- Grinding : possibility to remove more than 30mm in diameter (Standard limited to 1,7mm).
- Screen: Display of the current positions of the X and Z axes
- Malfunctions: Display of malfunctions in clear text on the screen.
- Troubleshooting: secure remote troubleshooting.
- Longitudinal: soft left/right stops, teach-in adjustment, simple and precise corrections.
- Dressing: for external grinding, automatic dressing with compensation. Dressing during the cycle or according to the number of parts.
- Transversal: diameter, teach-in adjustment, simple and precise corrections.
- Grinding : possibility to remove more than 30mm in diameter (Standard limited to 1,7mm).
- Screen: Display of the current positions of the X and Z axes
- Malfunctions: Display of malfunctions in clear text on the screen.
- Troubleshooting: secure remote troubleshooting.
Technical specifications and pictures without guarantee.