Inventory number: 16759
Centre lathe
|
11 Image(s)
|
| Centre height | 165 | mm |
| Distance between centres | 1000 | mm |
| Swing over cross-slide | 210 | mm |
| Swing over bed | 335 | mm |
| Spindle hole | 40 | mm |
| Taper in spindle: | ||
| Camlock | 4" D 1 | |
| Spindle speeds: | ||
| number (steps) | 16 | |
| from | 30 | rpm |
| up to | 2500 | rpm |
| Taper in tailstock: | 3 | MT |
| Feeds: | ||
| length: | ||
| from | 0.03 | mm/r |
| up to | 1.0 | mm/r |
| Frontal: | ||
| from | 0.015 | mm/r |
| up to | 0.5 | mm/r |
| Voltage 50 Hz 3x | 380 | Volt |
| Spindle motor | 5 | HP |
| Machine's weight about | 900 | kg |
| Overall dimensions machine: | ||
| Length | 2000 | mm |
| Width | 900 | mm |
| Height | 1200 | mm |
| Various accessories: | ||
| 3-jaw chuck Ø | 210 | mm |
| 3-jaw chuck Ø | 200 | mm |
| 4-jaw chuck Ø | 160 | mm |
| Set of jaws hard | ||
| Set of jaws | ||
| Fixed steady | ||
| Set of collets | W 25 | |
| Tool holder with elements | MULTIFIX | |
| Drill chuck | ||
| Lamp | ||
| Tool cabinet | ||
| Rear tool-holder stand |
Pdf (Print)
Information request
