Inventory number: 16278
Vertical machining center
|
17 Image(s)
|
| Table length | 1700 | mm |
| Table width | 610 | mm |
| Longitudinal travel (X-axis) | 1524 | mm |
| Transversal travel (y axis) | 610 | mm |
| Vertical travel (z axis) | 610 | mm |
| Table load max. | 1500 | kg |
| Tool changer: | ||
| Number of tools | 35 | |
| Tool diameter | 114 | mm |
| Diameter with free adjacent pockets | 200 | mm |
| Tool lenght | 400 | mm |
| Max. tool-weight | 15 | kg |
| Spindle nose: | MAS403-BT50 | |
| Pull-Studs | MAS403-BT50 | |
| Distance from vertical | ||
| spindle to table | 200-810 | mm |
| Distance from spindle-center to vertical slide | 345-955 | mm |
| Spindle speeds: | ||
| stepless | ||
| from | 15 | rpm |
| up to | 4500 | rpm |
| Torque max. | 940 | Nm |
| Feeds: | ||
| stepless | ||
| longitudinal from | 1 | mm/min |
| up to | 5000 | mm/min |
| transversal from | 1 | mm/min |
| up to | 5000 | mm/min |
| vertical from | 1 | mm/min |
| up to | 5000 | mm/min |
| Rapid traverse: | m/min | |
| Rapid traverse: long. | 15 | m/min |
| Rapid traverse: transversal | 15 | m/min |
| Rapid traverse: vertical | 12 | m/min |
| Voltage 50 Hz 3x | 380 | Volt |
| Spindle motor | 11/15 | kW |
| Feed motor | 3.0 | kW |
| Total power required | 37 | kVA |
| Machine's weight about | 12500 | kg |
| Various accessories: | ||
| Tool changer: | ||
| Number of tools | 35 | |
| Full splash cabin | ||
| Coolant system | ||
| Electronic hand held remote control | ||
| Set of toolholders | ||
| Set of cutter arbors | ||
| Tool cabinet | ||
| Lamp | ||
| Chucking clamp | ||
| RS-232 Interface | ||
| Central lubrification |
Pdf (Print)
Information request
